APC Power-Saving Back-UPS ES 700VA, 230V, 8 Australian (AS 3112) outlet (4 surge) This product is part of the Back-UPS range. It features a total of 8 power outlets, 4 of which are UPS battery backup and 4 that are surge only. Its runtime at 100W is 30 minutes. The UPS has a surge energy rating of 310 Joules and provides data line protection with a RJ45 analog phone line for phone or fax or modem or DSL. The Back UPS range supplies battery backup power during outages and unsafe voltage fluctuations, as well as protection from damaging surges and spikes - perfect for wireless networks, gaming consoles and other electronics. Main Input Voltage 230 V Main Output Voltage 230 V Other Output Voltage 220 V Rated power in W 405 W Rated power in VA 700 VA Input Connection Type Australian/Chinese Output connection type 4 Australian surge, 4 Australian Cable length 1.83 m Battery type Lead-acid battery Provided equipment- CD with software, Telephone cable, User manual Network frequency 50/60 Hz +/- 5 Hz auto-sensing Plug standard Australian/Chinese Maximum input current 10 A Maximum configurable power in W 405 W Output frequency- 47...63 Hz sync to mains, 50 Hz +/- 0.1 % for 50 Hz nominal unsynchronised Wave type Stepped approximation to a sinewave Output voltage tolerance +/- 5% static and 100% load step Maximum configurable power in VA 700 VA Transfer time 6 ms typical : 10 ms maximum Product certifications- A-Tick, C-Tick, CE, Telepermit Standards- EN/IEC 62040-1:2019/A11:2021, EN/IEC 62040-2:2006/AC:2006, EN/IEC 62040-2:2018 Equipment protection policy- Lifetime : 150000 AUD Ambient air temperature for operation 0…40 °C Relative humidity 0…95 % Operating altitude 0...30000 ft Ambient air temperature for storage -15…40 °C Storage Relative Humidity 0…95 % Storage altitude 0.00…9144.00 m Acoustic level 40 dBA Mounting mode- Not rack mountable Replacement Battery - RBC17 Compatible Batteries- BATT17-1209